Aerosol Products

Met-L-Chek® D-70 is a non-aqueous developer used in inspection Methods A, B, C, & D. Used with fluorescent penetrants as form “d” and with visible penetrants as form “e”, D-70 is available in aerosol and liquid forms. It is applied after the surface penetrant has been removed and the inspection surface dried. FEATURES Removable with water Safe for use on all metals See lis...

Met-L-Chek® E-59 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal. It is a slow dry rate material used in general metalworking, welding, nuclear and automotive applications. Met-L-Chek® E-59 is NOT used as a pre-inspection surface cleaner. FEATURES Low in sulfur, chlorine, fluorine, and other halogens Safe for use on tit...

Met-L-Chek® E-59A is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and pre-inspection surface cleaning, E-59A is a moderate dry rate material used in general metalworking, welding, nuclear, aerospace and automotive applications. FEATURES Low in sulfur, chlorine, fluorine and other halogens Safe for use on titanium and hi...

Met-L-Chek® FP-923 is a Level 3 sensitivity water washable inspection penetrant. It’s approved to AMS-2644 as a fluorescent (Type 1) for Methods “A” and “C”. FP-923 is approved for high sensitivity aerospace applications. FEATURES Low in sulfur and halogens Safe for use on all metal surfaces See list of approvals below

Met-L-Chek® FP-95A(M) is a Level 3 sensitivity post emulsifiable inspection penetrant. It’s approved to AMS-2644 as a fluorescent (Type 1) for Methods “B”, “C”, and “D”. FP-95A(M) meets requirements for high sensitivity aerospace applications. FEATURES Low in sulfur and halogens Safe for use on all metal surfaces See list of approvals below

Met-L-Chek® 1400B is a premixed, ready-to-use, fluorescent magnetic particle bath designed for high sensitivity fluorescent wet method inspection. 1400B meets the requirements of AMS 3045 and ASTM E-1444. FEATURES Pre-mixed, ready-to-use High flash point Durable particles See full list of approvals below

MPI-80 is a premixed, ready-to-use, visible black magnetic particle bath designed for high sensitivity visible magnetic particle inspection. MPI-80 is MPI-80P mixed in MPI-Carrier Fluid C2 and particle flow stabilizers. It is often used with WCP-81 white contrast paint to increase contrast for fine flaw detection. FEATURES Pre-mixed, ready-to-use Density: 840 g/L Flash Point:

Met-L-Chek® R-503 is an a class 2 (non-halogenated) inspection penetrant remover used for Method C. It’s ideal for penetrant wipe removal and pre-inspection surface cleaning. R-503 is a moderate dry rate material used in general metalworking, welding, nuclear, and aircraft applications. Met-L-Chek® R-503 is ideal for penetrant test panel storage and cleaning star burst cr...

Met-L-Chek® R-504 is a class 2 (non-halogenated), Method C inspection penetrant remover. Ideal for penetrant wipe removal and verification of indications. It is a flash dry rate material used in general metalworking, welding, nuclear, and aerospace applications. Met-L-Chek® R-504 is ideal for penetrant test panel storage and cleaning star burst cracks on TAM panels. FEATURES P...

Met-L-Chek® VP-30 is a visible (Type 2), water washable (Method A) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications for surface flaw and through leak detection. FEATURES Low viscosity Low in sulfur, chlorine, fluorine and other halogens Safe for use on titanium and high nicke...

Met-L-Chek® VP-31A is a visible aerosol post emulsifiable inspection penetrant designed to detect surface flaws and leaks. It is a visible (Type 2), post emulsifiable (Method B) and solvent removable (Method C) inspection penetrant. It is designed for use in general metalworking, welding, nuclear and automotive applications. FEATURES Low in sulfur, chlorine, fluorine and other...

WCP-81 is a specially formulated, fast drying white contrast paint. It is used to create a consistent background on the component surface to increase contrast for fine flaw detection with the black visible particles in MPI-80P. When dry, this white contrast paint is resistant to the wet method baths used for inspection. It is easily removed from the demagnetized component surfa...